1996 Ford Explorer - Project - I'd say completed, but I just saw that 12V microwave for sale

Computer
Front End - Streetdeck2
Large case - future will be ITX
Micro ATX Intel Motherboard
Windows XP SP3
DVD-RW drive in center console
M2-ATX 160W Intelligent DC-DC PSU

Internet
AT&T Tilt (HTC Kaiser)
HardSPL 3.56
L26 KaiserTouch V1 M2D ROM
Windows Mobile 6.1
Internet Sharing Application (Microsoft) over USB

Display
Liliput EBY-701 7'' LCD Touchscreen
Enclosure is custom and self made
Modified extra radio enclosure (dremel, super glue, bondo, sand, paint)
Powered off of 12V line from computer
Auto power on

Peripherals
ElmScan 5 USB OBD-II Scan Tool
US GlobalSat BU-353 Weather-proof GPS Receiver
Powered USB hub - Powered from computer's 5V line

Emergency Lighting
Whelen Talon - blue/blue - LED - (Front)
SoundOff Signal Headlight Flasher - (highbeam) - (Front)
Federal Signal S2 Viper Dual - blue/blue - LED - (Rear)
SoundOff Signal Taillight flasher - Brake/Reverse - (Rear)
Galls Five-Function Switch Box with 12V DC Receptacle

Radio/Network:
Icom V-8000 (auto power-on with relay)
Linksys Router with DD-WRT (pull power from computer PSU)

Todo:
Install (internet from ethernet/phone network adapter bridging ((dhcp from phone and ICS are same, must bridge)))
/\ /\ /\ Above is a major problem. If I use ICS from phone to computer, and ICS from computer to router, both ICS networks uses the same IPs and it does not work. I briefly tried bridging the USB Network connection from the phone and the ethernet port to see if the phone would hand off more than 1 IP, but no luck yet. There may have been another problem. I'll work on this more when it's warm.

Front Console - No descriptions - Larger Size

Front Console - With Descriptions - Larger Size

Front of Vehicle - Whelen Talon LED and Headlight Flasher On - Larger Size

Rear of Vehicle - Federal Signal S2 Viper Dual - Larger Size

Large case - P4 - 1GB RAM - MTX Sub - Larger Image

Updated February 13, 2009